Model of a 20-cm Shell Gun on Slide and Pivot, anonymous, c. 1854 Canvas Print
Model of a 20 inch grain gun with harness on a sled on a ground shelf. The barrel, long 57.1 cm and with a caliber of 40 mm, has a trouser ring with a loose end piece, a visor with attachment rod at the back, a visor at the level of the tap pin and a percussion lock that strikes at an angle; The grape is flat. The upper spout, narrower from the front than the back, consists of two cheeks with two steps, connected by an oblique calf and the ash bodies; the elevation screw is located in the posterior axle body. Metal axles run through the axle bodies, where the double wheels are fitted to the ends. The wheels only serve for the transport of the affuit next to the carriage, but can also be mounted under the carriage. In position, the upper spout rests with the ashes on the layers of the carriage. At the back are two small wheels, which can lift the back of the affuit like a jack, making it easy to rest on two small wheels and easy to get on board. The upper is coupled to the carriage with a remmechaniek, which consists of a clamping device. The carriage is a wooden framework, the layers of which are covered with brass; the rear pivot is positioned slightly forward to reduce the turning circle. The crossbars are covered with brass at the bottom to facilitate their movement on the turning circles in the deck. Scale 1:5 (derived).
-
100% Made In America
-
Next Day Shipping Available
-
100% Money Back Guarantee
-
Free Shipping On Orders Of $150+
-
Use Shopify Pay to break the price down into 4 easy payments!
Select Your Size